#Epson 330 printer problems driver

ThisВ procedure should be considered вЂњa last ditch effortвЂќ and assumes that there is an adequate amount of ink available for the ink system recovery. NOTE 2:Epson does not endorse this ink system recovery procedure. NOTE 1:В While warm tap water is most readily available in the home, use of distilled water is suggested as it is technically safer for the printhead as it does not contain calcium or contaminants which could clog ink nozzles and/or impact the printheadвЂ™s long term performance.

Activate the вЂHead CleaningвЂ™ routine once again to see if the respective color(s) begins to flow.

Remove paper towel from beneath PRINTHEAD/CARRIAGE assembly.

NOTE: Use of a syringe works best by forcing water into port. Thoroughly dampen the ink port with 1-2 teaspoons of distilled water (eye-dropper or syringe works best pour or drip water directly into ink port).

YouвЂ™ll see a round mesh ink port where ink flows into the PRINTHEAD.Gently slide a paper towel under the PRINTHEAD/CARRIAGE assembly.Remove suspect color cartridge вЂ“ if unknown, then remove all cartridges.If, after activating the вЂHead CleaningвЂ™ routine 2 times in a row along with manufacturerвЂ™s suggested printer cleaning procedures, blank pages are observed or output print quality is extremely poor then the printhead may have partially dried out or is clogged and a water flush of the ink ports may be necessary to help recover the ink system.* If you cannot identify which color is causing the problem, print a test page/nozzle check via: 1) your printerвЂ™s вЂMaintenanceвЂ™/вЂ™ToolsвЂ™ panel or 2) via the Inkjet411 вЂTest PrintsвЂ™ button below.

#Epson 330 printer problems driver

If any streaks or missing colors appear on prints, initiate a вЂNozzle CheckвЂ™ from the printerвЂ™s вЂMaintenanceвЂ™/вЂ™ToolsвЂ™ menu or driver вЂOptionsвЂ™ menu.В If gaps or spaces are visible in the printed nozzle stair-step pattern then youвЂ™ll need to perform a вЂHead CleaningвЂ™ once or twice to correctВ (NOTE: this will consume upwards of 10% of your total remaining ink). For the best refilling experience, only use Epson original/genuine ink tanks. NOTE 2:В A compatible, remanufactured or re-branded ink cartridge can be problematic when installed into the printer following refilling typically the smart chip (at base of cartridge) cannot be reliably programmed.В Compatible cartridges are typically purchased on-line or at select retailers (i.e sold under a different label than the regular Epson cartridge packaging) and is essentially a вЂњremanufactured tankвЂќ of the Epson original/genuine ink cartridge (note that the green smart chip, pictured below, is different than the Epson OEM chip pictured above). You only need to replace the actual cartridge which is causing the issue. right arrow key) to help determine which specific ink cartridge is actually causing the вЂUnrecognized CartridgeвЂ™ error condition. NOTE 1:В On some Epson printer models you may need to scroll thru the menu options (i.e.

If an вЂњUnrecognized CartridgeвЂќ or вЂњReplace CartridgeвЂќ message appears, you will need to return the suspect ink cartridge to the refill store to have the cartridge re-programmed and weighed.В If the ink cartridge has been reprogrammed a 2nd time and the problem persists then the cartridge is likely internally electrically damaged (ink level monitoring circuit) and will need to be replaced.

Inspect for ink residue on the surface of the micro-chip using a lint-free towel, gently clean with isopropyl alcohol. The chip should be present and there should be NO cuts or gashes on the micro-chip surface as this may render the cartridgeВ unusable. If this does not correct the problem, remove the suspect cartridge(s) and carefully inspect the smart chip on the bottom of cartridge. вЂњCartridge ErrorвЂќ / вЂњUnrecognized CartridgeвЂќ), then remove and reinstall ALL of the ink cartridges into the carriage. If the printer cannot recognize the ink cartridge (i.e. Additional alerts may be displayed the first time you go to print or copy вЂ“ dismiss the alerts accordingly to resume normal print operations. In some cases you may have to scroll over using the arrow keys to dismiss the alerts.

Press proceed/continue/accept/yes/OK to dismiss the prompt.

Your printer/computer may display an ink alert message such as вЂњnon-genuine cartridgeвЂќ.

NORMAL Cartridge Errors (following refilled cartridge installation) Please refer to Abnormal Cartridge Errors below to rule out additional variables.

ATTENTION: If you had a cartridge refilled and an вЂњUnrecognized CartridgeвЂќ or вЂњReplace CartridgeвЂќ error message ( Red X) appears you may need to return the suspect ink cartridge to the refill store to have the cartridge re-programmed (on the rare occasion, the cartridge chip may not get properly re-programmed).